NNFD197 Posted October 24, 2019 Report Posted October 24, 2019 I just purchased a Rhodan trolling motor for my 2200 pathfinder. The boat has never had a trolling motor on it before so this will be a first install for the boat and my self. It seems pretty straight forward after reading the installation instructions but I figured I'd shoot out a post to see the do's and don'ts. Honestly I'm a little scared to drill into my new boat but as long as I get the 4 mounting holes right the first time, I'll be happy. I've laid it on the deck and marked the bracket so the motor head is just inside the rub rail so I don't smack it on a dock. And when deployed I have the shaft an inch from the rub rail for clearance. Any comments, concerns would be nice. Thanks
SCFD rtrd. Posted October 26, 2019 Report Posted October 26, 2019 You might get more help/replies if you post this in the general section. Lots of members have mounted their own trolling motors.
AlanJ Posted October 26, 2019 Report Posted October 26, 2019 Just wondering ,what size shaft length do you have to keep it inside the rubrail? 60'' or 54"
HoneyB Posted October 26, 2019 Report Posted October 26, 2019 Sounds perfect to me. Use good fender washers under the deck.
NNFD197 Posted October 27, 2019 Author Report Posted October 27, 2019 19 hours ago, AlanJ said: Just wondering ,what size shaft length do you have to keep it inside the rubrail? 60'' or 54" 60"
Recommended Posts
Archived
This topic is now archived and is closed to further replies.