Headhunter Posted December 13, 2015 Report Share Posted December 13, 2015 I cut in some flush drink holders and obviously cut through the foam sandwiched between the deck and under the gunnel. Should I seal the foam somehow? If with what? Thanks all, for your guidance! Link to comment Share on other sites More sharing options...
justfish Posted December 17, 2015 Report Share Posted December 17, 2015 I did the same and wiped foam in the cut out w 5200 and allowed to dry before putting cup holders in Link to comment Share on other sites More sharing options...
Headhunter Posted December 17, 2015 Author Report Share Posted December 17, 2015 I had some white gel coat repair I mixed up and brushed on. It worked fine and I am ready to move on to the next little project. Link to comment Share on other sites More sharing options...
justfish Posted December 17, 2015 Report Share Posted December 17, 2015 I had some white gel coat repair I mixed up and brushed on. It worked fine and I am ready to move on to the next little project. Good deal. If you run out of projects let me know I have some for you! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.