Wanaflatsfish Posted December 1, 2020 Report Share Posted December 1, 2020 Got a question from a member on the anti-siphon valve.. Here is the one which was on my Pathfinder T on the tank...it was easy to get to so I replaced it with a new one Tank and the crud that was inside it...... Here is the one which came off my Master Angler......it was full of crud...it has a spring and when the spring is clogged it results in the bulb going flat.....sometimes you can just tap the antisiphon valve when you are on the water and it will release the crud...but, best to change it out....it's a safety valve to prevent fuel from pouring out of the tank in the event of broken line etc. Best to have them, but, they are a PIA. See the amount of crud on my MA17 tank.... Quote Link to comment Share on other sites More sharing options...
DonV Posted December 1, 2020 Report Share Posted December 1, 2020 Had the same problem, easy fix. Drive the ball and spring out of the bottom, clean and re-install with no ball. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.