Lance Goodgion Posted March 6, 2022 Report Share Posted March 6, 2022 My port Lenco tab has quite working. Don't this it's the Actuator. Can anyone tell me where or if there is a fuse for these. I did some quick looking today but couldn't find anything. Thanks Quote Link to comment Share on other sites More sharing options...
jh141 Posted March 6, 2022 Report Share Posted March 6, 2022 Likely not a fuse or breaker if only the port side is not working. There should be a connector not far from the actuator. Start looking for a problem there. Quote Link to comment Share on other sites More sharing options...
jim33042 Posted March 6, 2022 Report Share Posted March 6, 2022 If you need to replace, here is a response I gave on my replacement Quote Link to comment Share on other sites More sharing options...
gatorb8 Posted March 22, 2022 Report Share Posted March 22, 2022 when my Lenco’s fail it’s usually corrosion in the DPDT up/down switch connectors found some switches with rubber boot covers on amazon was year ago so no link, try google Quote Link to comment Share on other sites More sharing options...
J.N Posted April 3, 2022 Report Share Posted April 3, 2022 Mine have been a constant pain in the ***. I've had to have them welded, re wired and switches changed out more than once. Anymore I avoid using them unless it's really choppy and I'm at 30 mph max. I recently had one break while going 60 plus mph and it wasn't cool. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.