Jump to content

Boat Covers Direct for 2200TRS


Ketchafew

Recommended Posts

I recently acquired a 2022 2200TRS and need to buy a cover.  I talked to BCD regarding both Carver and Shortex.  Regarding the Shortex, they state for years 2010-2019.  The person I talked to couldn't tell me if the Shortex would fit a 2022.  Was there a significant change from 2019 to 2020-2?  For Carver I asked how to handle the Jack plate and they said go to the next size.  So 2300HPS??  That brought up more questions they couldn't answer.  BCD has good reviews,  does anyone have and experiences with this? I'd prefer to have motor cover separate from the boat cover reason I was asking about Shortex.

Link to comment
Share on other sites

I have a 2012 2200 TRS and have had two Shoretex Covers from BCD. They are excellent semi custom covers. My first was black, To Hot.... I sold it. My current is Tan, much better. They have both fit very well. I have a separate cover for my Yamaha SHO.  I do "not" have a Tee Top and remove my Trolling Motor. 

I Can "not" say if the years are the same or not. I have seen the 2022 and the overall dimensions do not look different than my 2012.

 

Boat Covered.jpg

Link to comment
Share on other sites

14 hours ago, jh141 said:

I have a 2012 2200 TRS and have had two Shoretex Covers from BCD. They are excellent semi custom covers. My first was black, To Hot.... I sold it. My current is Tan, much better. They have both fit very well. I have a separate cover for my Yamaha SHO.  I do "not" have a Tee Top and remove my Trolling Motor. 

I Can "not" say if the years are the same or not. I have seen the 2022 and the overall dimensions do not look different than my 2012.

 

Boat Covered.jpg

Thanks JH...is yours the TravelTuff, Prism or Hydrofend?

Link to comment
Share on other sites

3 hours ago, TerryS said:

Here is what I got . The motor hood will scratch the top of your outboard if you don’t put an engine cover on. But overall it’s not bad . 2020 22 TRS E598A650-9974-427C-8508-4F1778EB08CD.thumb.jpeg.6a84cb5a1ba737534c2117a8f751d2f9.jpegEDCB65B1-90A0-4103-A647-19271DFDD01E.thumb.jpeg.3f26186f637a3bfa2840686224d86fcc.jpeg237F1785-D9B5-4E89-9E63-A081A789BFB5.thumb.jpeg.25ac582014a0194ef3f5f0b8828f3da2.jpeg

Thanks Terry, Is yours the standard 2200TRS?  The reason I ask is they told me to order one size up for the jack plate.  There is only one size for the TRS so was a but confused.

Link to comment
Share on other sites

2 hours ago, jh141 said:

Hydrofend.  I also have the jackplate.

I do not think you would need to go one size bigger for a jackplate on the 2200. The JackPlate makes up for the "Recessed Transome" if that makes sense.

Thanks yes make perfect sense.  I've been running a 2002 RD16 for the last 10+ years and it's very low tech...analog gauges and such.  I'm sure I'm going to have some questions like....the Simrad GO12 doesn't recognize the Yamaha command link,  I'm guessing there is a cable still required to attach it to the network?

Link to comment
Share on other sites

  • 3 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...