CG RYAN Posted September 4, 2016 Report Share Posted September 4, 2016 I replaced the splash well hatch on my 2200v with a 12x16 and it worked awesome for bilge access. My TE has a much smaller area and I'm wondering what model/size you guys are going with. The TH marine oval one I have on there is not the greatest and keeps popping out. Thanks Link to comment Share on other sites More sharing options...
Hurricane Bubba Posted September 4, 2016 Report Share Posted September 4, 2016 This is the one that I used in a MA. My buddy used one in a 2200V and in his MA as well. http://greatlakesskipper.com/jim-black-582-1115-05-11-x-15-polar-white-boat-service-door-hatch I'm attaching some pics of the install showing how much room I had and the hatch installed. Easy install, the hardest part was cutting the CK material (my MA has a carbon kevlar cap) under the steering, but a rotozip and a cutoff wheel made easy work. The pumps are a little dusty in the one pic but the amount of room that you have to wok in is amazing. WAY BETTER THAN THE PIE PLATE!!! https://goo.gl/photos/fcFSUbg5zB5kHQ928 https://goo.gl/photos/wcojhCgWAFnSRrTi6 https://goo.gl/photos/zuRU5wo2Yo9ejJKS8 https://goo.gl/photos/uYbUMkN697qXH7nE9 Link to comment Share on other sites More sharing options...
craSSh Posted September 4, 2016 Report Share Posted September 4, 2016 I'm gonna do this to mine. Awesome idea. This is why MBGForum rules! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.