rubble Posted October 8, 2017 Report Share Posted October 8, 2017 Id like to get a fishfinder back on the bow of the boat. With the Ulterra configuration, I cannot see a way to put a ducer on the iPilot TM without having wites everywhere. Anyone out there have a ducer installed in the Ulterra/iPilot or have a suggestion how to setup a bow mounted fishfinder? Thought about a shoot thru ducer but not sure how/where to mount forward on the boat. Also considering shipping TM to Master Repair to have ducer installed in the lower unit of TM. Link to comment Share on other sites More sharing options...
dcathey Posted October 9, 2017 Report Share Posted October 9, 2017 If your main gps unit will network you can you just add a display to the front and use the signal from the main transducer. Link to comment Share on other sites More sharing options...
marzomi Posted October 9, 2017 Report Share Posted October 9, 2017 this is what i do. NMEA 2000 to connect the 3d and thru hull 2d ducers to the bow mounted MFD. unless you're fishing in 5 feet of water or less this works perfectly Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.