Candle Posted May 26, 2018 Report Share Posted May 26, 2018 The fluid level in my PP reservoir is low. What type of fluid should I use? Thanks! Link to comment Share on other sites More sharing options...
dabear Posted May 26, 2018 Report Share Posted May 26, 2018 26 minutes ago, Candle said: The fluid level in my PP reservoir is low. What type of fluid should I use? Thanks! Brian I have seen people use green marine ISO-32 hyd. fluid . How have you been ? Joe R Link to comment Share on other sites More sharing options...
Vaca Cut Posted May 26, 2018 Report Share Posted May 26, 2018 I use type A ATF in my PP reservoir, as long as you don't have any leaks to contend with. The question is why is the fluid level low, only reason would be a leak somewhere. Link to comment Share on other sites More sharing options...
FLDXT Posted May 26, 2018 Report Share Posted May 26, 2018 I used ATF fluid, but I wouldn't recommend it, I'd go with the green marine. ATF is a pia yo clean up, I also had an issue with my cylinders rusting out, not sure if it was from the atf or what. Link to comment Share on other sites More sharing options...
triplec Posted May 27, 2018 Report Share Posted May 27, 2018 http://www.power-pole.com/green-marine Link to comment Share on other sites More sharing options...
Wanaflatsfish Posted May 27, 2018 Report Share Posted May 27, 2018 read the faq rhey specify what type you can use if the eco green not a available dc Link to comment Share on other sites More sharing options...
Candle Posted May 27, 2018 Author Report Share Posted May 27, 2018 Thanks everyone! Brian Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.