Saskatoon Posted March 12, 2014 Report Share Posted March 12, 2014 Recently purchased 05 hpx-v 17 with power pole. Where is pp pump normally installed? Link to comment Share on other sites More sharing options...
Hobo Posted March 17, 2014 Report Share Posted March 17, 2014 Saskatoon .... I see that this is your first post.... Welcome!! Unfortunately you have listed your post in the Cl***ified ads section rather that the "working" forum posts.... As to your question,,, I am a PowerPole dealer installer and 99.9% of all PowerPole pump installations are in the starboard-aft compartment... Most of mine being located on the aft wall of this compartment... ----------<" ){{{{>< Link to comment Share on other sites More sharing options...
linesider 159 Posted March 17, 2014 Report Share Posted March 17, 2014 Yep, or in my case with duals I had no room so they are actually in the upper part of bilge. Not saying that's the preferred place I would rather have them under the console Link to comment Share on other sites More sharing options...
hurricane Posted March 17, 2014 Report Share Posted March 17, 2014 Hobo, are you back in business? Sent a few guys your way for Poles and I heard you retired.... Link to comment Share on other sites More sharing options...
jaco2 Posted April 7, 2014 Report Share Posted April 7, 2014 mine is in the center console Link to comment Share on other sites More sharing options...
Sterling Posted July 24, 2014 Report Share Posted July 24, 2014 What oil should I use in the pp pump. PP is moving a little slow and i am thinking the oil may be low. Thank you. Link to comment Share on other sites More sharing options...
jh141 Posted July 25, 2014 Report Share Posted July 25, 2014 Match whats there.Do not mix. All newer PP use an ISO-32 Green marine 100 percent biodegradable. Some older units used ATF. I would not think low hydraulic fluid would cause slow operation. The c Monster Control is speed adjustable. Check that. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.