BlazerAL Posted December 7, 2018 Report Share Posted December 7, 2018 Found a gently used OFX4 x 17 prop, which is recommended for my setup, 04 PF 2200V with a 6” bobs JP and an F150 Yamaha . Only issue is the dia is 15 1/2” in lieu of the typical 13 3/4”.. what do you guys think? Likely will not get the full WOT rpm’s and Top speed? Link to comment Share on other sites More sharing options...
mulligan Posted December 7, 2018 Report Share Posted December 7, 2018 I pretty sure the OFX only comes in one diameter. Link to comment Share on other sites More sharing options...
DWoodham Posted December 7, 2018 Report Share Posted December 7, 2018 I wound contact Marcus at power tech. He’s the pathfinder guy. Just ordered a ofx 4R 15p CL YX 200 port 3/8” for my 22’ 06 T. Link to comment Share on other sites More sharing options...
hurricane Posted December 7, 2018 Report Share Posted December 7, 2018 2 hours ago, mulligan said: I pretty sure the OFX only comes in one diameter. Pretty sure that is the case. Link to comment Share on other sites More sharing options...
bernieNC Posted December 7, 2018 Report Share Posted December 7, 2018 1 hour ago, hurricane said: Pretty sure that is the case. X2 but it is 15 1/4. Link to comment Share on other sites More sharing options...
BlazerAL Posted December 7, 2018 Author Report Share Posted December 7, 2018 Thanks guys!!! Link to comment Share on other sites More sharing options...
Wanaflatsfish Posted December 7, 2018 Report Share Posted December 7, 2018 4 hours ago, BlazerAL said: Found a gently used OFX4 x 17 prop, which is recommended for my setup, 04 PF 2200V with a 6” bobs JP and an F150 Yamaha . Only issue is the dia is 15 1/2” in lieu of the typical 13 3/4”.. what do you guys think? Likely will not get the full WOT rpm’s and Top speed? I had the same prop...it's perfect for the F150 with a JP. WOT is about 42-44 with a full load....go on the Powertech Props site and you will my video..I sent to Marcus...I had one of the first OfX props for a Pathfinder F150 combo.... No blow out in the turns...you can hole shot on 6 then bring it down.... dc Link to comment Share on other sites More sharing options...
DWoodham Posted December 8, 2018 Report Share Posted December 8, 2018 17 hours ago, Wanaflatsfish said: I had the same prop...it's perfect for the F150 with a JP. WOT is about 42-44 with a full load....go on the Powertech Props site and you will my video..I sent to Marcus...I had one of the first OfX props for a Pathfinder F150 combo.... No blow out in the turns...you can hole shot on 6 then bring it down.... dc That’s encouraging, mine came in yesterday. Can’t wait to get it on. I’ve had the wrong prop for way too long. Thanks Link to comment Share on other sites More sharing options...
Wanaflatsfish Posted December 8, 2018 Report Share Posted December 8, 2018 5 hours ago, DWoodham said: That’s encouraging, mine came in yesterday. Can’t wait to get it on. I’ve had the wrong prop for way too long. Thanks You should see good hole shot and mid range acceleration improved...... Top end is the only issue if you like speed....I was always happy at 34-38 mph at cruise.... dc Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.