HewesYourDaddy Posted July 15, 2019 Report Posted July 15, 2019 There seems to be a range of answers for this question. Let me start with some background info..... I have a 2013 Suzuki DF140A with a interface cable that has version 3.5 software (correct version for my engine). I want to put an older type SMIS gauge on the boat (fits better than the newer square ones). I have been told that the V2.5 gauge will work with engine as long as I have the correct interface cable for my engine. I have also been told that it won’t. Any Suzuki experts on here that can give me a 100% definitive answer? The people telling me it will work say that the interface cable to engine is the deciding factor, and that the gauge just displays what the interface cable allows to pass thru it.
Shallowminded6 Posted July 17, 2019 Report Posted July 17, 2019 Try posting on THT. There is a couple dealers (Outboard specialties), (international marine) that frequent there and usually give good advice to people who post. Im sure they could answer if you come up empty here.
HewesYourDaddy Posted July 17, 2019 Author Report Posted July 17, 2019 I was able to answer the question, finally. Thanks.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.