Wanaflatsfish Posted August 15, 2019 Report Share Posted August 15, 2019 Will I ever get humpty dumpty back together again dc Link to comment Share on other sites More sharing options...
fishmanjj Posted August 15, 2019 Report Share Posted August 15, 2019 WOW 😮 Link to comment Share on other sites More sharing options...
Coto Posted August 15, 2019 Report Share Posted August 15, 2019 What seems to be the problem, is that screw on the frame loose? 😀 Link to comment Share on other sites More sharing options...
imsnookyrd Posted August 15, 2019 Report Share Posted August 15, 2019 looks like a loose muffler bearing or misaligned kanibling rod. Link to comment Share on other sites More sharing options...
smilemaker Posted August 15, 2019 Report Share Posted August 15, 2019 All you need is a volt meter from harbor freight. Free with coupon and purchase. Just another fun weekend. Link to comment Share on other sites More sharing options...
bernieNC Posted August 15, 2019 Report Share Posted August 15, 2019 Keep hitting it, it’ll fit! Link to comment Share on other sites More sharing options...
Limitless Posted August 15, 2019 Report Share Posted August 15, 2019 Duct tape, WD40, and baling wire Dino. You can do it. Link to comment Share on other sites More sharing options...
THE OUTLAW Posted August 15, 2019 Report Share Posted August 15, 2019 Man, such bad timing too ! Really epic fishing right now . Will leave a few for you bro . 🇺🇸☠️ Link to comment Share on other sites More sharing options...
MuddyBottomBluz Posted August 15, 2019 Report Share Posted August 15, 2019 If woulda just kept the center console closed, none of this would be happening right now! Link to comment Share on other sites More sharing options...
Wanaflatsfish Posted August 15, 2019 Author Report Share Posted August 15, 2019 1 hour ago, THE OUTLAW said: Man, such bad timing too ! Really epic fishing right now . Will leave a few for you bro . 🇺🇸☠️ On house arrest right now by the Admiral until I get all my Honey Do's completed....September 1st, I'll get back in the game dc Link to comment Share on other sites More sharing options...
whichwaysup Posted August 15, 2019 Report Share Posted August 15, 2019 I don't know what that thing ate, but it definitely didn't agree with it. Make sure you don't order that off the menu . . . Link to comment Share on other sites More sharing options...
Wanaflatsfish Posted August 15, 2019 Author Report Share Posted August 15, 2019 5 hours ago, Coto said: What seems to be the problem, is that screw on the frame loose? 😀 23 years of pent up anger......I just opened the door and it was like an exorcism took place.....it flew out at me (LOL)... Actually, Here's what's going on.... 1.) New Bennet Trim tabs to be installed...I had to trace back all the wiriing and change out the toggles to a new one.....I have documented this and will post later 2.)When I opened up the switch panel, I found that the starter switch was a bit warm and traced it to an open ground. Decided to buy a new switch and install it. 3.) I am eliminating all the "non-essential" type of switches and will only have a bilge pump toggle switch and livewell toggle. Courtsey lights will be pull out for simplicity.... 4.) Rear bilge no longer has the HPU pump so lots of room.....more to come with pics etc..... 5.) Installing a custom Bimini top tomorrow.... Hopefully, Humpty Dumpty will be back together by Sunday for a day on the water with the Admiral.... dc Link to comment Share on other sites More sharing options...
fin-addict Posted August 15, 2019 Report Share Posted August 15, 2019 Think Bimini is the least of your problems brother. But know you can handle this. Link to comment Share on other sites More sharing options...
Mangroovin Posted August 16, 2019 Report Share Posted August 16, 2019 First item on Honey Do list should be drop off boat at wiring guru. Item number 2 - Do your Honey Do list while boat being fixed. Item number 3 -- Pick up "ready to use" boat soon as complete Item number 4 - Show off to DonH the new wiring and claim you did it yourself. Item number 5 - Get back on the water. 😝 Link to comment Share on other sites More sharing options...
Tarpon1215 Posted August 17, 2019 Report Share Posted August 17, 2019 What he said☝️ Link to comment Share on other sites More sharing options...
Wanaflatsfish Posted August 17, 2019 Author Report Share Posted August 17, 2019 SO, AT THE RECOMMENDATION OF OUR OWN MASTER WELDER - RALPH THE OUTLAW, I HEADED OVER TO GDS CANVAS IN FLL OFF COMMERCIAL AND 1-95 AND HOOKED UP WITH ROCCO FOR A CUSTOM MADE BIMINI. His work, like Ralph's recommendation is flawless....he's not inexpensive, because he uses all quality products - Sunbrella, all stainless clips, heavy duty holding straps, and I had the bimini made with ALL STAINLESS...using Accon quick releases....quality stuff for sure.... What I wanted was something that would provide shade on Capt Donh's throne and 1/2 the skiff, allow me stand, hold one rod in front rod holder, and stand on the rear deck to grab a chunk rod not he poling platform.....he delivered..... IT'S AN 8 FOOT BIMINI WHEN FULL SPREAD....I DO HAVE THE OPTION TO LOWER IT A BIT...I WANT TO SEE HOW IT WORKS OUT ON WATER BEFORE I DO SO... More detailed pics to come..... AT ROCCO'S SHOP - GDS CANVAS SIDE PIC OF THE BIMINI SO BEGINS THE RE-WIRING.... I am installing new bennet tabs (electrical)....more on this later....but, I am running new leads to the console for the bilge and the live well.... I am using a Klien snake and using good old gorilla tape to pull the wiring.... Here are a couple of pics... As well, I found that my ignition key was running a bit warm, so I replaced it - thanks Mike at Boat Center, FLL for getting me the parts quickly....and, OH, BTW, never send your wife to pic up boat parts - yes, I lost my man card as I was working...her first call back to me was........hmmmmm...$170 for key switch....time for new Michael Koors purse I wrap the tape to the wiring and then insert the clip of the snake... Link to comment Share on other sites More sharing options...
nsbpathfinder Posted August 17, 2019 Report Share Posted August 17, 2019 How's the weight of an all stainless bimini? Can it be handled by one? Link to comment Share on other sites More sharing options...
Hobo Posted August 17, 2019 Report Share Posted August 17, 2019 Hey Dino,,,, Wish I were closer.... I would love to help you out.... Haven't worked on an HPX in a couple of years... ---------------------<" ){{{{>< Link to comment Share on other sites More sharing options...
fishmanjj Posted August 17, 2019 Report Share Posted August 17, 2019 1 hour ago, Hobo said: Hey Dino,,,, Wish I were closer.... I would love to help you out.... Haven't worked on an HPX in a couple of years... ---------------------<" ){{{{>< Hobo.... you must have run out of shells or just got tired of shooting straight 100’s. Welcome back , JJ Link to comment Share on other sites More sharing options...
Moderator Posted August 18, 2019 Report Share Posted August 18, 2019 Hey Hobo !! Dino hurt his back carrying the load of questions by himself... since you went shootin.. Good to see you stopping in !! Marc Link to comment Share on other sites More sharing options...
Tarpon1215 Posted August 18, 2019 Report Share Posted August 18, 2019 Yeah, when I have to answer new guys questions, you know we’re in trouble.😉 Link to comment Share on other sites More sharing options...
Wanaflatsfish Posted August 18, 2019 Author Report Share Posted August 18, 2019 13 hours ago, nsbpathfinder said: How's the weight of an all stainless bimini? Can it be handled by one? UP and DOWN yes...but, it's a bit heavy.....but, too put it on the skiff into the ACCON holders....it does take some ummmmmmphhh...but, can be done....it is easier with two people and takes about 30 second to put it in place. dc Link to comment Share on other sites More sharing options...
Wanaflatsfish Posted August 18, 2019 Author Report Share Posted August 18, 2019 10 hours ago, Hobo said: Hey Dino,,,, Wish I were closer.... I would love to help you out.... Haven't worked on an HPX in a couple of years... ---------------------<" ){{{{>< it was great speaking with you the other day.....as I said, you have been my inspiration and have been a great mentor.... Sounds like life is good...shooting, grandkids, a bit of fishing.....I am very happy for you... Don't be a stranger here....the forum is still a great place...Marc and Bubba have done a great job keeping it a family and information oriented resource for skiff owners. God's Speed, Health, and smooth seas in your life dc Link to comment Share on other sites More sharing options...
Wanaflatsfish Posted August 18, 2019 Author Report Share Posted August 18, 2019 Humpty Dumpty is coming back to life Figured out the wiring scheme and I decided to go simple and changed out the multi prong plugs.... Work to date: Changed out the Bennett Hydraulics and went with Electric....bought it on Amazon and purchased the new switch from Boat Owners Warehouse along with the new wiring harness. Changed out the bilge pump (in progress later today) and rewired the live well switch (to be finished today), re-wired the stereo, installed a new ignition switch. wired the GPS to the trolling motor battery so it won't turn off when there is a small surge in voltage and I loose my mileage....cleaned up all the wiring and replaced the non used switches with blanks. I also, with the help of forum member COTO, installed a new hydraulic help....more on this once I get some time to post the pics of the work.... HERE ARE THE PICS OF THE BENNET WORK... Hydraulic disconnected..... taking off the 22 year old hydraulic tab...... New tabs...... I have got to comment: THEY ARE BEASTS VERY VERY LARGE AND APPEARS TO BE A DEFINATE UPGRADE TO THE LENCOS. AND IT WAS TRULY PLUG AND PLAY..... TABS OUT AND READY FOR THE NEW INSTALL..... THE WIRES ARE THEN PUSHED THROUGH THE HULL...BENNETT HAS A NICE GROMMET WITH SEALS WITH THE TAB TOP HINGE...IT FIT DIRECTLY BACK INTO THE SAME HOLES AND I ADDED 5200 INTO BOTH THE HOLES AND AROUND THE HINGE....ADDED NEW LOWER CONNECTION TO THE BOTTOM OF THE TAB. TESTING THE SYSTEM BEFORE I INSTALL IT AND WIRE IT TOGETHER... THE CONSOLE NEEDED TO BE CUT TO FIT THE NEW SWITCH....USED THE ROTO ZIP.... HERE IS A PIC OF MANY OF THE SWITCHES READY TO GO....ALMOST.... I HAD TO PURCHASE A NEW HYDRAULIC SWITCH AND I RAN NEW WIRING TO THE STERN...TOM AT BENNETT SAID THE ONE OF THE MAJOR PROBLEMS HE FINDS IS WHEN YOU INSTALL A NEW SET OF ELECTRIC TABS AND USE OLDER CABLE WIRING...MINE WAS OVER 20 YEARS OLD, SO I FIGURED IT WAS TIME.... IN THE PIC IS THE NEW IGNITION SWITCH, BILGE SET AND READY TO GO, JUST NEED TO INSTALL IT IN THE BILGE....I ALSO INSTALLED A USB CHARGER AND THERE IS A SIMPLE SWITCH FOR THE LIVEWELL.... TABS WORKING WIRING CLEANED UP...... FINALLY CLOSED UP..... TIME TO GET THE BILGE BACK AND READY ..... MORE PICS IN THE COMING DAYS..... DC Link to comment Share on other sites More sharing options...
Wanaflatsfish Posted August 27, 2019 Author Report Share Posted August 27, 2019 more progress..... I needed to work on the bilge area....cut out the pie hole and added a bilge access hatch..i had to cut out the hinges so it could open....i added a couple of screws which will have a washer to hold it in place.. tools of the trade and a bit of blood and guts .....gotta love bilge work need to add a new thru hull...i decided to go all brass...uggggggghhhhh $150 in brass...but, won't have to change it for this lifetime the old one 22 years old NEW..... THROUGH HULL BRASS..... MORE TO COME..... ALMOST THERE.... DC Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.