civilized Posted September 5, 2019 Report Share Posted September 5, 2019 So it’s tome for me to replace the gaskets/seals on all of my storage boxes. Anyone ever done this? What product did you use and how did you like the outcome? Mine is an 06 2200v. thanks Quote Link to comment Share on other sites More sharing options...
bernieNC Posted September 5, 2019 Report Share Posted September 5, 2019 Do a search here on the subject. There have been a couple good threads. Quote Link to comment Share on other sites More sharing options...
doktrred Posted September 5, 2019 Report Share Posted September 5, 2019 On my 1999 2200V PF, the front storage boxes use a seal with a side attachment and the rubber on top, that's different than the aft 2 hatches which use this seal from McMaster Carr: 1120A322 Water- & Weather-Rst Rubber Push-on Seal with Bulb on Top, Hollow, for 3/16" Edge, 7/16" Wide, 10 ft. Length https://www.mcmaster.com/catalog/125/3615 I don't know if your 2006 has same seals as mine or not. I haven't replaced the front seals, but the seals for the aft hatches were right on the money as far as size and fitment. I did put a little wax on the rubber part(saw that suggestion somewhere on this board I think), to prevent the seal from adhering to the hatch. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.