AntonRx Posted October 19, 2019 Report Posted October 19, 2019 Hey all! Getting around to replacing my trim tabs actuators and plates. When I’m looking for replacements, what size am I looking for? I measured them but not sure if the sizes listed are for the tip or the mounting side. See photos and let me know what size these are considered. Are they considered 9x12”? Thanks as usual. Also, photos coming for my t-top leg anchor plate install.
MuddyBottomBluz Posted October 19, 2019 Report Posted October 19, 2019 Yes, 9 x 12 is a standard size, if they worked well for you keep the same size, 12 x 12 would be the next size up but should not be necessary for your boat.
fin-addict Posted October 19, 2019 Report Posted October 19, 2019 What you have are 12x12, 9x12 is standard. If what you have works for you keep the same size. May be a reason these were used.
AntonRx Posted October 19, 2019 Author Report Posted October 19, 2019 So, the dimensions for these are width on transom side and length. Great. Thanks! These are the original tabs from pathfinder. I’m going to stick with what they put on.
MuddyBottomBluz Posted October 19, 2019 Report Posted October 19, 2019 Yeah, keep the same mounting holes too, hopefully!
Recommended Posts
Archived
This topic is now archived and is closed to further replies.