Squanto10 Posted October 24, 2019 Report Posted October 24, 2019 Hey y’all, my fuel sending unit I believe is out, the gauge is permanently stuck on full. I’ve ran the fuel down to what I imagined as almost empty. I’ve read that the sending unit could be the issue as the other features on the gauge still work. My question is where is it located and how do I access it. I have a 2010 hewes redfisher 18. I’m quite the novice when it comes to repairs but I’m learning. Any and all help would greatly be appreciated. Thanks!
smooth move Posted October 24, 2019 Report Posted October 24, 2019 chances are that the unit is fine, the ground wire is probably corroded or even broken at the crimp. don't have a clue where it is at on your boat. on mine, 2200v, it's under the console and there's a access hatch in the floor of the console. good luck.
Coto Posted October 24, 2019 Report Posted October 24, 2019 Check the inside of your console, if there is pie hole access plate unscrew that. That's usually where it is located.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.