Reegs2200v Posted January 15, 2020 Report Share Posted January 15, 2020 2004 Pathfinder 2200 Going to be installing a new gps unit, still not entirely decided on the unit. Was going to look into ordering a custom dash panned once I’ve decided on the specific unit. Looking to see what size units people have been able to put into the dash on this console. Looking for a nice clean in dash look. Pictures would be greatly appreciated to give me some ideas! Thanks in advance. Quote Link to comment Share on other sites More sharing options...
DWoodham Posted April 20, 2020 Report Share Posted April 20, 2020 I just added a 12” screen to my 22t. My console is smaller than yours. I used a balzout mount( super quality, but not cheap). It gets the unit closer to you, you can get the angle you need and it doesn’t require cutting a hole in your console. 1 Quote Link to comment Share on other sites More sharing options...
smilemaker Posted April 20, 2020 Report Share Posted April 20, 2020 I believe that the panel size on the old 2200v and 2200TE are pretty much the same. The difference is down at the floor in the lower third with the rod holders. You should be able to do a 12 inch lowrance or simrad but it will take up the entire panel. Put the vhf underneath and use the new lowrance to operate a sonic hub for sound. Here is my panel but not much help as it is full custom. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.