Jump to content

2016 2200 TRS Trolling Motor Replacement


BillAV8R1

Recommended Posts

Posted

Most 2200 owners use a 60” long 80 lbs thrust, unless you are constantly fishing in heavy current then go with the 36v 101 lbs thrust motor.

An Ulterra or Riptide with spot lock are popular.

Posted

I have the same boat and Riptide 60 inch shaft and 80lb thrust with two dedicated Trolling motor agm batteries.  It has the spot or anchor lock and works very well in everything but the strongest of tides, so 90% of the time for me.

Posted

With a 36 volt you can fish many spots that others will have to struggle with. The motor  does not have to work  as hard so battery life is improved.  The 3rd battery can be difficult to locate under the console but it is doable. 

Posted

36 volt will give you so much more run time and a lot more holding power in strong current situations. I'm a big fan of the Rhodan but any 36 volt motor would out perform a 24 v system on these boats.  I feel the added cost was well worth it. 

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...