Jobsite322 Posted March 9, 2020 Report Share Posted March 9, 2020 I am trying to figure out if it is possible to fit speakers in the rear deck of my 2013 22T. I have search the forum for an answer with no luck. It is my understanding that speaker wire are in place from the factory i just cannot get comfortable sticking a hole saw in the back deck. It seems that that live well goes the full width from the release well to the pump hatch divider. Does anyone know if it's possible? Any one done it before that can help with location? Thanks for any help in advance! Quote Link to comment Share on other sites More sharing options...
fin-addict Posted March 9, 2020 Report Share Posted March 9, 2020 I have seen photos of them on this forum and on the net of pathfinders having them but not sure of your model. It can be done on a 22 TRS as shown on their website. May help you. Quote Link to comment Share on other sites More sharing options...
BradM Posted March 17, 2020 Report Share Posted March 17, 2020 Can you post pictures of the area and the bulkhead/deck layout? I have a 23 HPS, different I know, and was up against the same thing....And was even told by the local dealer I couldn't fit JL 8.8's back there. I did. I taped my GoPro to a 1/2" piece of PVC (for flexibility) and poked around from the bilge access. I used another piece of PVC that I marked from 0-12" with a Sharpie, sounds crude, but it worked. I could see the area and get an idea of the distance from the bulk head to live well. I have 8.8's in the rear...And when I took my boat in for service, guess who took measurements for future boats; that's right, the dealer. 1 1 Quote Link to comment Share on other sites More sharing options...
Squanto10 Posted May 12 Report Share Posted May 12 On 3/17/2020 at 9:12 AM, BradM said: Can you post pictures of the area and the bulkhead/deck layout? I have a 23 HPS, different I know, and was up against the same thing....And was even told by the local dealer I couldn't fit JL 8.8's back there. I did. I taped my GoPro to a 1/2" piece of PVC (for flexibility) and poked around from the bilge access. I used another piece of PVC that I marked from 0-12" with a Sharpie, sounds crude, but it worked. I could see the area and get an idea of the distance from the bulk head to live well. I have 8.8's in the rear...And when I took my boat in for service, guess who took measurements for future boats; that's right, the dealer. If possible can you post a picture of you speaker layout? From factory is there really prefab wiring there? I’m looking to do the same to a 2300HPS that I’m getting next week. I want to run the jl 8.8 as well in the front of the body from the front rod lockers. Any advice and pictures would be greatly appreciated! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.