17T Power Pole Install

[Donh]

Anyone installed a Power Pole on a Pathfinder 17T? Considering same. If so, pictures would be appreciated.

Thanks,

dh

[swaddict]

yes, a small circular hatch must be cut (unless you're a smurf!!) to get to the backing plate for a transom installation and the foam must be shaved.

[image]https://swaddict.smugmug.com/photos/i-59RcDPN/0/M/i-59RcDPN-M.jpg[/image]

[image]https://swaddict.smugmug.com/photos/i-BTtF7fr/0/M/i-BTtF7fr-M.jpg[/image]

[Donh]

Thx. The guy with the saw might have more questions.

dh

[swaddict]

let me know if you need pics of the inside

[Wanaflatsfish]

let me know if you need pics of the inside

Please do...getting back in the game with a 17T...

please send them to Dino.Cardelli@gmail.com

Thanks so much.

dc

[blue dolphin]

My rear mounts for the platform loosened and my deck had no molded in aluminum plates, were only screwed into the gl***. I had an aversion to cutting the deck and instead put access hatches in the rear wall of the liner inside the rear compartment to access those spaces. Allowed me to lay in the rear compartment and reach thru to the aft part of each sponson. Thru bolted with locknuts and 5200 10 yrs ago and still tight. Think you could install a PowerPoint the same although I'm partial to simple as in stick it.