2200TRS Posted July 14, 2020 Report Share Posted July 14, 2020 Hi Guys, I want to add the two strips from the photo below to my 2016 2200 console. I believe the photo is a 2018. That way the top of the console can serve as storage while running. Has anyone done this? Wondering if I can order the same parts from Pathfinder. They look like they will fit. Or ideally one long strip since my compass is not in the center. Thanks Quote Link to comment Share on other sites More sharing options...
HoneyB Posted July 14, 2020 Report Share Posted July 14, 2020 I want to do the same thing just have not found a small enough piece of starboard yet. Quote Link to comment Share on other sites More sharing options...
smilemaker Posted July 14, 2020 Report Share Posted July 14, 2020 they are just starboard cut and rounded over with a router/shaper. just like working with wood Quote Link to comment Share on other sites More sharing options...
koondog Posted July 14, 2020 Report Share Posted July 14, 2020 I added one of these to the top of my 2200TRS and have really enjoyed it. Highly recommend. https://www.deepbluemarine.com/products-detail.cfm?ProductID=406 Quote Link to comment Share on other sites More sharing options...
fin-addict Posted July 14, 2020 Report Share Posted July 14, 2020 2 hours ago, koondog said: I added one of these to the top of my 2200TRS and have really enjoyed it. Highly recommend. https://www.deepbluemarine.com/products-detail.cfm?ProductID=406 Did the same, works great Quote Link to comment Share on other sites More sharing options...
Bamaskeet Posted July 14, 2020 Report Share Posted July 14, 2020 I cut a piece of black starboard and screwed it to the top of the console, it works great and was a easy job. Quote Link to comment Share on other sites More sharing options...
mustang190 Posted July 14, 2020 Report Share Posted July 14, 2020 I had a company called Boat Outfitters make one for me. Just sent them the measurements they even drilled the holes for the screws. Don’t remember the price but it was cheaper than I could have done it for. Quote Link to comment Share on other sites More sharing options...
ASB Posted July 14, 2020 Report Share Posted July 14, 2020 I used a piece of starboard and rounded the edge with a router. You could also get a custom one made with sea deck. It would protect the top and no screw holes. Quote Link to comment Share on other sites More sharing options...
BradM Posted July 14, 2020 Report Share Posted July 14, 2020 8 hours ago, HoneyB said: I want to do the same thing just have not found a small enough piece of starboard yet. I can mail you a piece of 3/4” scrap I have that will do it. You’ll need to square it up on that fancy table saw though. One edge is square..... Quote Link to comment Share on other sites More sharing options...
HoneyB Posted July 15, 2020 Report Share Posted July 15, 2020 Heck yeah . You think it’s long enough to go all the way across? I can measure it. Quote Link to comment Share on other sites More sharing options...
BradM Posted July 15, 2020 Report Share Posted July 15, 2020 15 hours ago, HoneyB said: Heck yeah . You think it’s long enough to go all the way across? I can measure it. Yeah, I doubt your console is any wider than mine. The piece I have is a couple feet long. and maybe 1" wide at the widest point. Quote Link to comment Share on other sites More sharing options...
HoneyB Posted July 15, 2020 Report Share Posted July 15, 2020 Sounds perfect Brad. I will send you a reminder of my address. thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.