ohfosho Posted November 10, 2020 Report Share Posted November 10, 2020 I have a 2006 22ft TE . It appears that I have some separation from the cap and hull . Has anyone had this issue and what's the best way to go about fixing this ? Thanks Brian Quote Link to comment Share on other sites More sharing options...
jh141 Posted November 10, 2020 Report Share Posted November 10, 2020 What Does the Rub Rail that came off look like? Does it wrap under on the bottom? Was the unevenness between the cap and hull visible with the rub rail installed ?? I am sure others that own this year 22 TE will chime in. Quote Link to comment Share on other sites More sharing options...
HoneyB Posted November 10, 2020 Report Share Posted November 10, 2020 I do not know the answer but I sure am curious. I would wonder how much flex there is there and if the screws go through the cap and hull. If the screws attach the two pieces I think 520O and put the screws back in. But again I’m no boat builder. Quote Link to comment Share on other sites More sharing options...
Bamaskeet Posted November 11, 2020 Report Share Posted November 11, 2020 5200 and oversized stainless screws should fix your problem. Quote Link to comment Share on other sites More sharing options...
HoneyB Posted November 11, 2020 Report Share Posted November 11, 2020 I would say you probably need to glass up that one place that is broken out . I’m guessing that would allow water in even if the cap were sealed Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.