jjharrity Posted March 21, 2021 Report Share Posted March 21, 2021 Hey guys, any help would be greatly appreciated.. How the hell do I remove the helm? My steering is fine, but the wheel itself it a little wobbly at the connection and it bugs the crap out of me. Thanks in advance! IMG_9792.MOV Quote Link to comment Share on other sites More sharing options...
HoneyB Posted March 21, 2021 Report Share Posted March 21, 2021 Start with wheel removal. Take off the center cap and remove the nut from the shaft of the helm. You will hear a million wash’s to pop the wheel up. I like to loosen the nut to flush top. I then use a wide flat pry bar (not a screw driver). Pry up while hitting the shaft and flushed nut on the helm. This will pop the wheel up. Remove the nut and wheel and see if there really is that much play in the helm or the connection at the wheel. The flat bar is important as to be wide enough not to bend your wheel. Using a puller will also bend the thin stainless on the wheel. Quote Link to comment Share on other sites More sharing options...
jim33042 Posted March 21, 2021 Report Share Posted March 21, 2021 Sent you a pm. Quote Link to comment Share on other sites More sharing options...
blewbyu Posted November 10, 2021 Report Share Posted November 10, 2021 I replaced this wheel with an Edson wheel. Huge difference. Quote Link to comment Share on other sites More sharing options...
jim33042 Posted November 10, 2021 Report Share Posted November 10, 2021 How about a pic of that Edson?! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.