oxman Posted April 22, 2021 Report Share Posted April 22, 2021 Hello all, I have been searching for some old posts on this but not coming up with much. I know i read some posts on this before but anyway. I had 2 of the flange end caps on the rod tubes break, basically the pvc is so old it fell apart. The others are not far behind on my 2004 redfisher18. I know this happens to alot of guys so what have you all done to tidy this up? Does anyone have a direct replacement insert? Everything i search is either 2 big or to small. I measured one of the old ones and it is roughly 2" total outside diameter of the larger part of the flange. The inserting section has a OD of 1.75" ( so that inserts into a ID 1 3/4" pvc rod tube. Any help would be appreciated. Tight Lines! Quote Link to comment Share on other sites More sharing options...
SouthernWake Posted April 22, 2021 Report Share Posted April 22, 2021 I believe TH marine carries these. I know they do have other flanges. Quote Link to comment Share on other sites More sharing options...
oxman Posted April 22, 2021 Author Report Share Posted April 22, 2021 Thanks i will check them out. Quote Link to comment Share on other sites More sharing options...
coopaloopa Posted June 30, 2021 Report Share Posted June 30, 2021 Did you find what you needed? I need the same part Quote Link to comment Share on other sites More sharing options...
fishmanjj Posted June 30, 2021 Report Share Posted June 30, 2021 I also need a couple of those . Quote Link to comment Share on other sites More sharing options...
coopaloopa Posted July 2, 2021 Report Share Posted July 2, 2021 I saw on an old post a member mention being able to get these through a mbg boat dealer. I called my local dealer and was able to find them no problem. Hopefully this helps someone in the future. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.