TLauer0 Posted December 24, 2021 Report Share Posted December 24, 2021 1992 Maverick Master Angler Hull and Trailer only. It has Stringer issues that have lead to flex and stress cracks down the Strakes with one place allowing water in, so it’s time to part it out and move on. The cap will have to be pulled and stringers/bulkheads/insides redone. Solid platform for a project MA 18. I redid the outside 3 years ago and have fished it almost every day since then. The trailer is full aluminum but the L-Brackets and bunks will need redone. The boat has been on a lift for 3 years so I never got around to updating the trailer. Rims and tires are brand new though, only towed on 3 times. I completely unrigged the boat so there is not more wiring in the boat/engine is ready to be taken off. Upholstery/backrest will stay on the hull. Newer 1100 GPH livewell pump/Seacock valve will stay. *I have full videos walking through the boat and more pictures I can send*: $4,500 obo -Also selling the 2002 Yamaha 150 Ox66 that includes Steering Wheel/Helm, SeaStar Hydraulic steering/cable, Yamaha Controls/cables, Oil Reservoir tank etc. Great running engine that cranks every time. I have right over 500 hours on the engine (selling separately unless someone wants the hull, trailer, and engine together). $5,000 obo text me: Tim: 941-662-9953 Quote Link to comment Share on other sites More sharing options...
whichwaysup Posted December 24, 2021 Report Share Posted December 24, 2021 If anyone decides to take this on, feel free to reach out. We have learned a lot about this issue and how to address. Does not necessarily require removing a any part of the cap. Quote Link to comment Share on other sites More sharing options...
FLDXT Posted December 25, 2021 Report Share Posted December 25, 2021 Where is the boat? Quote Link to comment Share on other sites More sharing options...
TLauer0 Posted December 28, 2021 Author Report Share Posted December 28, 2021 On 12/25/2021 at 7:29 AM, FLDXT said: Where is the boat? Tampa, FL Quote Link to comment Share on other sites More sharing options...
TLauer0 Posted December 28, 2021 Author Report Share Posted December 28, 2021 On 12/24/2021 at 1:29 PM, whichwaysup said: If anyone decides to take this on, feel free to reach out. We have learned a lot about this issue and how to address. Does not necessarily require removing a any part of the cap. Yeah I believe it can all be done but cutting the cockpit floor out and bracing the middle part of the stringers/bulkheads. My plan was to do it myself with my brother but he just had a baby and you know how that goes lol Quote Link to comment Share on other sites More sharing options...
TLauer0 Posted January 2, 2022 Author Report Share Posted January 2, 2022 The Hull and trailer sold. I still have the 2002 Ox66 for sale. Quote Link to comment Share on other sites More sharing options...
Shallowminded6 Posted January 3, 2022 Report Share Posted January 3, 2022 15 hours ago, TLauer0 said: The Hull and trailer sold. I still have the 2002 Ox66 for sale. You might want to post it in the accesories section. Will get more views from people just looking at engines. Quote Link to comment Share on other sites More sharing options...
whichwaysup Posted January 3, 2022 Report Share Posted January 3, 2022 If I were smart I would buy that thing and mothball it till I need it!!! Quote Link to comment Share on other sites More sharing options...
TLauer0 Posted January 4, 2022 Author Report Share Posted January 4, 2022 18 hours ago, whichwaysup said: If I were smart I would buy that thing and mothball it till I need it!!! Haha it runs great. I fish 6 days a week up until the day 3 weeks ago when I decided to break the boat down and part it out. It was always ran and never sat which is always a good thing. I have a guy coming to compression test it today and deposit etc. I’ll keep you in the loop! Quote Link to comment Share on other sites More sharing options...
DaveVero Posted January 4, 2022 Report Share Posted January 4, 2022 Can you tell me approximately what your engine is selling for as I have a 2002 HPDI with the same number of hours that I am thinking of selling so I can put a SHO on my MA.? Did you ever find the 21 MA you were looking for? Quote Link to comment Share on other sites More sharing options...
TLauer0 Posted January 5, 2022 Author Report Share Posted January 5, 2022 On 1/4/2022 at 8:45 AM, DaveVero said: Can you tell me approximately what your engine is selling for as I have a 2002 HPDI with the same number of hours that I am thinking of selling so I can put a SHO on my MA.? Did you ever find the 21 MA you were looking for? $4,500 with all controls, cables, Seastar hydraulic steering and lines, steering wheel/helm, oil reservoir etc. The guy put a deposit on it and is bring his boat back next week to hang it for the transport. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.