captbobrcc Posted February 25, 2023 Report Share Posted February 25, 2023 Trim tabs calibration Quote Link to comment Share on other sites More sharing options...
Wanaflatsfish Posted February 28, 2023 Report Share Posted February 28, 2023 Can you please elaborate ? dc 1 Quote Link to comment Share on other sites More sharing options...
fin-addict Posted March 1, 2023 Report Share Posted March 1, 2023 Know of no such thing 🤷🏻♂️ 1 Quote Link to comment Share on other sites More sharing options...
Moderator Posted March 1, 2023 Report Share Posted March 1, 2023 They do make a trim tab gauge that shows the relative position of the tabs. It has the retractor when the key is turned off. Perhaps the gauge shows down tab on a side after the key is turned off ? MM 1 Quote Link to comment Share on other sites More sharing options...
George Seither Posted March 1, 2023 Report Share Posted March 1, 2023 Part # 15170-001 Lenco control /LED Position Indicator switch, considering upgrading mine in the 2300 but no calibration procedures I know of. 1 Quote Link to comment Share on other sites More sharing options...
searing Posted March 1, 2023 Report Share Posted March 1, 2023 I have the Lenco switch that George mentioned on my boat part #15170-001 I like having the tab position indicator lights. If the auto retract is wired it will calibrate the first time it powered on and then off. If you choose to not use the auto retract I’m pretty sure all you have to do is move the tabs all the way up or down until they are to the end of their travel the indicator lights will then show the correct position. Very easy, wire it up and use them, no calibration. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.