elopomorph Posted July 17, 2023 Report Share Posted July 17, 2023 My used 2013 Pathfinder 22 TRS has some rusty Gemlux latches. I plan to replace three of the hatches on my boat. The current latches will take some work to remove due to rust and the marine caulk used on them. Before I go breaking the seal and doing the work I am hoping someone can tell me the hole cutout size for my Pathfinder. Also, I am not able to keep my boat at my house so I am trying to maximize my time when I go to work on the boat. So I am hoping to remove and replace the hatches on the same trip. Gemlux has options of 2 inch, 2.5 inch, and 3 inch hole sizes. I am hoping someone can tell me the hole cutout size for my 2013 Pathfinder TRS. This way I can order the hatches and have them on hand when I make a trip to remove the old latches. Any information would be appreciated. Quote Link to comment Share on other sites More sharing options...
George Seither Posted July 17, 2023 Report Share Posted July 17, 2023 Go to the gemlux site and look at each latch below each latch are links to engineer drawings and each latch dimensional drawing , try this link and see if it helps https://gemlux.com/collections/boat-latches/products/3108 https://files.gemlux.com/pdf/1266-2 - MARKETING.pdf Quote Link to comment Share on other sites More sharing options...
jh141 Posted July 17, 2023 Report Share Posted July 17, 2023 My 2012 TRS has GemLux Compression 6030 latches.GemLux Compression 6030-115S.pdfGemLux Compression 6030-115S.pdfGemLux Compression 6030-115S.pdf Quote Link to comment Share on other sites More sharing options...
jh141 Posted July 17, 2023 Report Share Posted July 17, 2023 Honestly, I would remove one and call GemLux. These are way to expensive to order the wrong ones. Quote Link to comment Share on other sites More sharing options...
George Seither Posted July 17, 2023 Report Share Posted July 17, 2023 Yep ! Quote Link to comment Share on other sites More sharing options...
elopomorph Posted July 27, 2023 Author Report Share Posted July 27, 2023 Ok. thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.