Headhunter Posted July 22, 2023 Report Posted July 22, 2023 A little guidance please. Went fishing this morning. All good except that the Yamaha control panel went blank. I get fuel level and trim (trim bar blinks), speed. I know the speed is coming from the gps so that interface works. No rpm, temp, voltage. Anyone trouble shoot this that can give me some direction? Quote
George Seither Posted July 22, 2023 Report Posted July 22, 2023 Only things I can think of are check connections and spray with electrical cleaner or wd 40, see if the engine dropped a fuse that supplies the gauge. Hope it helps Quote
George Seither Posted July 22, 2023 Report Posted July 22, 2023 Look for fuses 10amp coming off of back of gauge as well Quote
Headhunter Posted July 22, 2023 Author Report Posted July 22, 2023 Thanks George. I think its either something from the ecm on the motor or the gauge itself. The gauge has power and some functions from different sources but not the engine functions. I did look and check the fuse for the controller and the connections. Quote
redzone1 Posted July 22, 2023 Report Posted July 22, 2023 How are you getting your speed on your 6YC to get the speed from GPS? 1 Quote
George Seither Posted July 24, 2023 Report Posted July 24, 2023 Any luck or is the gauge toast? Quote
Headhunter Posted July 24, 2023 Author Report Posted July 24, 2023 I am thinking it's not getting any info from the ecm so it could be the ecm or the gateway. I will call the dealer this morning 1 Quote
Moderator Posted July 24, 2023 Report Posted July 24, 2023 Hope it’s something simple, Chuck.. Marc 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.