civilized Posted April 12, 2016 Report Share Posted April 12, 2016 Almost done updating her....2006 2200V 150 Vmax (carb'd)... New Wiring - 2016 Minn Kota Riptide Ulterra 112 Atlas Jack Plate 6" Set Back Garmin 741 XS Added LENCO LED trim tab indicator switch All new gauges and switches - 2016 New dash panel with back lighting Miami Black Powder Coating on pipe work Waiting to install new windshield and reinstall cushions... Still needs a good coat of wax Link to comment Share on other sites More sharing options...
JerryM Posted June 26, 2016 Report Share Posted June 26, 2016 That looks great! I have a 2006 also, need to start re-doing some things also. I love your dash panel, can you tell me who did it. + Link to comment Share on other sites More sharing options...
JerryM Posted June 26, 2016 Report Share Posted June 26, 2016 Can you also tell me about the trim tab switch and what you had to do to install it. Which Lenco controller is it? Link to comment Share on other sites More sharing options...
civilized Posted June 27, 2016 Author Report Share Posted June 27, 2016 Bob at Inshore Marine Specialties in Oakland Park, FL did my panel. Lenco: http://www.lencomarine.com/index.php/products/lenco-switch-kits/led-indicator-switch-kit-single Thanks! Link to comment Share on other sites More sharing options...
koondog Posted July 6, 2016 Report Share Posted July 6, 2016 I really like the power coating. Was it easy to take all of the hardware off ? Grab bar and leaning post? I've thought about taking mine off and doing the same... Link to comment Share on other sites More sharing options...
civilized Posted July 27, 2016 Author Report Share Posted July 27, 2016 Thanks!! The grab rail was easy to remove. The leaning post is a whole different story...I broke of a machine screw or two, had to use the easy out, then the epoxy/glue wouldn't give...it was a pain!!! I ended up having a guy experienced in marine work (worked for a boat dealer for like 15 years) help me out with it....not sure what he did, but he got it off...I think he had to repair a small patch of fiberglass around one of the flanges of the leaning post...but glad I had it done...kinda sets it apart... Link to comment Share on other sites More sharing options...
JEM Posted July 28, 2016 Report Share Posted July 28, 2016 Very nice looking helm! Sounds like you will have a new boat! I like to see these older Pathy's refreshed. What kind of power is that on the transom? 150 SHO? Congratulations! Link to comment Share on other sites More sharing options...
civilized Posted August 2, 2016 Author Report Share Posted August 2, 2016 Thank you! I need to update the pictures...boat has been killing fish this summer and been busy with that...... The power is an old school 150 Vmax (carb'd). Thanks again! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.