Bfuller Posted February 22 Report Share Posted February 22 The boat is in very good shape and is very clean for its age. All the upgrades have been added in the last year. Everything works. The motor starts every time and runs strong. With the 4-blade prop, the boat tops out around 38-40. With just me in it, it will run around 28mph @ 4000 rpms. The 3-blade prop would push it to about 43, and cruise right at 30 mph. The boat does not have a fuel gauge. I have always fueled up before leaving the dock and conservatively estimated a cruise burn of about 3.5 mpg. I have made the following upgrades over the last year and a half. - Garmin 74sv - MinnKota RipTide 24v 70lb w/spot lock - Upholstery was done May 2023 - Birdsall Marine Leaning post with backrest - AIM Welding Swim Ladder - New Wire Marine Switch Panel - Noco 3 bank Battery charger - Fusion MS-RA60 Head Unit - Kicker 8” marine speakers - All new Ancor wire and connectors - Bilge Pump + Float Switch - Livewell Pump - Aerator Pump 1999 Yamaha 115hp 2-stroke - Hours unknown - Will have serviced prior to sale - Powertech RXB4 Prop - Original 3 Blade Aluminum Prop 2023 Continental Trailer - Purchased 4/2023 - Spare tire and hub included - Estimated 2000 miles on trailer The gel coat is in good shape. There are some scratches on the outside, which you would expect to see on a 24 year old boat. There is a crack on the port side gunnel. It has been there since I got it, and has not expanded, I just have not got around to fixing it. There is also a chip in the gel coat under the drain plug. I am happy to sea trial the boat with cash in hand. 2 Quote Link to comment Share on other sites More sharing options...
Bfuller Posted February 22 Author Report Share Posted February 22 Located in Savannah, GA Quote Link to comment Share on other sites More sharing options...
HewesYourDaddy Posted March 7 Report Share Posted March 7 Very nice. I'll pass this along to some local guys. 1 Quote Link to comment Share on other sites More sharing options...
Bfuller Posted April 29 Author Report Share Posted April 29 Just got the boat back from fiberglass shop. See pics of repairs on the crack on the gunnel and drain plug. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.