TerryS Posted April 3 Report Share Posted April 3 I’d like to use the Atwood style 3/4 pin stainless steel base plate, but I’m concerned if I screw it through the deck the leverage of a long seat post may be too much force, anyone have this setup I would like to put it on the mark Quote Link to comment Share on other sites More sharing options...
fin-addict Posted April 3 Report Share Posted April 3 Yes, have done it on two boats with no problem. Just use a backing plat larger than the chair base mount. This is the set up I made and used on my Pathy. 3 Quote Link to comment Share on other sites More sharing options...
NCTribute Posted April 5 Report Share Posted April 5 On 4/3/2024 at 7:23 AM, TerryS said: I’d like to use the Atwood style 3/4 pin stainless steel base plate, but I’m concerned if I screw it through the deck the leverage of a long seat post may be too much force, anyone have this setup I would like to put it on the mark My 2200TE has the factory seat post mount in the location you marked, I really do not like it there, it is too far forward to be useful and comfortable. I use a Blacktip Fabrications Emperor’s Stool with a Kennedy mount in the lid of the bow compartment.. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.