johnd Posted April 23, 2016 Report Share Posted April 23, 2016 1991 Redfisher (Lappy). The live well (aft center, plumbed) is leaking into the bilge. The leak is 1) either where hose connects to plastic elbow drain at bottom. 2) where hose connects to thru hull. 3) the hose or 4) drain in well Thoughts? Link to comment Share on other sites More sharing options...
johnd Posted April 24, 2016 Author Report Share Posted April 24, 2016 Found the leak! It is the plastic thru hull where live well emptys. Located in the pocket, directly above the bilge drain plug....just because my arms aren't long enough will need a helper. Looks simple enough (I hope). Link to comment Share on other sites More sharing options...
Geaux Time Posted April 24, 2016 Report Share Posted April 24, 2016 Nice that you found it. That is where the larger aft hatch comes in handy. Link to comment Share on other sites More sharing options...
johnd Posted April 25, 2016 Author Report Share Posted April 25, 2016 and one project leads to another It may be the elbow (that swivels) that leads to thru hull, or it may be the hose appears a bit short - and yeah, no leverage to pull out hose thru tiny round hatch. fortunately not mission critical, so if opportunity presents I'll fish the boat.. but one of those annoying things I want fixed. Link to comment Share on other sites More sharing options...
trf97 Posted April 26, 2016 Report Share Posted April 26, 2016 Might be easier to replace all of that plumbing at once. Piece it all together ut of the boat and then attach it to the boat. Much easier to do things on a bench than in the small hatch in the bilge. Link to comment Share on other sites More sharing options...
johnd Posted April 26, 2016 Author Report Share Posted April 26, 2016 Fixed. Removed hose from well, installed new hose. Used a little dope on elbow threads to thru hull. Put a plug in thru hull, filled well with water..no leaks. No doubt something bigger than the pie hole would have made this easier. Now, if I could get the base for thru hull ducer that is 5200'd to the hull out...thinking that was factory in 1991. It's lowest section of bilge & would like my builder pickup there...Always another project on a boat:) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.