Miss Jazzy Posted April 26, 2016 Report Share Posted April 26, 2016 Just purchased a '02 2200 with a 200 Vmax HPDI. This is my first Pathy with a 200. Both my previous were 150's. It has a 21p 4 blade but I do not know the make. Prop looks a little worn. I was wondering what is the norm in a 4 blade with this combo. Link to comment Share on other sites More sharing options...
RodWorks Posted April 26, 2016 Report Share Posted April 26, 2016 I run a Power Tech OFX 4 blade 19. Does 52-53 with T Top. Used to run a Yamaha Pro Series 3 blade 21, which was faster but blew out in corners. Link to comment Share on other sites More sharing options...
nicecast Posted April 26, 2016 Report Share Posted April 26, 2016 I run a 21 Tempest 3 blade and a 19 Rev 4 4 blade. I get about the same speed as Rodworks with both of them, slightly higher speed and max RPM with the Tempest. Link to comment Share on other sites More sharing options...
hurricane Posted April 26, 2016 Report Share Posted April 26, 2016 Power tech OFX4 19 if its a 2.6L or OFX420 if its a 3.3L motor. Link to comment Share on other sites More sharing options...
Miss Jazzy Posted April 26, 2016 Author Report Share Posted April 26, 2016 Thanks, I was thinking a 21 p was too much for a 4 blade. Link to comment Share on other sites More sharing options...
Slo Poke1 Posted April 26, 2016 Report Share Posted April 26, 2016 Check with Marcus st PowerTech, I'm happy with his recommendation. Link to comment Share on other sites More sharing options...
Tarpon1215 Posted April 26, 2016 Report Share Posted April 26, 2016 OFX19R Link to comment Share on other sites More sharing options...
Ghostman Posted April 27, 2016 Report Share Posted April 27, 2016 Marcus put me on an OFX4 19R 3/8 ported for my 200 vmax hpdi 2.6. on a 2004 2200v. I couldnt be happier.....runs low 50's with full fuel and 2 big guys. Link to comment Share on other sites More sharing options...
Miss Jazzy Posted April 28, 2016 Author Report Share Posted April 28, 2016 Great to hear! Thanks guys! Link to comment Share on other sites More sharing options...
fin-addict Posted June 24, 2016 Report Share Posted June 24, 2016 On 4/25/2016 at 9:16 PM, Miss Jazzy said: Just purchased a '02 2200 with a 200 Vmax HPDI. This is my first Pathy with a 200. Both my previous were 150's. It has a 21p 4 blade but I do not know the make. Prop looks a little worn. I was wondering what is the norm in a 4 blade with this combo. what prop was the best with the 150 vmax hpdi. number you got from it. others join in please. Link to comment Share on other sites More sharing options...
Miss Jazzy Posted June 26, 2016 Author Report Share Posted June 26, 2016 My 150 Vmax had a 3 blade PowerTech 19p. It topped out at 51 mph. Can't remember the rpm's. Good holeshot too. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.