Jump to content

LT20 cover


Drmajor

Recommended Posts

Need cover for LT20.  Saw photo of one that was flat except for bump in center for console.  Did not cover motor or tower.

Any idea who makes it?

Would like elastic around sides so it can be "popped on".  Has to be simple or won't use.

Other suggestions?

Hewew LT cover-1.jpeg

Link to comment
Share on other sites

I use the Sunbrella builds from these guys. Covers the poling platform and center console and has wrap around elastic and tie down points. You'll get about 5 years out of it before you might see stitching start to let go. If the stitching ever fails you can take it to any auto upholstery shop and they can re-stitch it and make it like new again.

Sunbrella Boat Covers for the Hewes LT 20

 

-Mike

Link to comment
Share on other sites

  • 2 years later...
On 5/24/2016 at 8:32 PM, Hamfisted said:

 You'll get about 5 years out of it before you might see stitching start to let go. If the stitching ever fails you can take it to any auto upholstery shop and they can re-stitch it and make it like new again.

There's new thread out now that carries the same 10 year warranty as Sunbrella fabric.  Last year we had a cover built for our Refisher 18 by a local canvas shop of good reputation and long standing. It came with the same warranty on the thread.  Don't recall the name of the shop, but it was arranged by Fort Myers Marine, and I'm sure they can put you in touch.  Classy work, and great guys to deal with. They came to our house and measured the boat, then brought the finished cover back for a final fitting check and instructions.  The guy even asked if he could come back every year or so to look it over and make sure everything was right in addition to the thread.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...