Slo Poke1 Posted August 14, 2016 Report Share Posted August 14, 2016 Thinking about adding the shallow water model, any thoughts on performance? Link to comment Share on other sites More sharing options...
Lap it Up Posted August 14, 2016 Report Share Posted August 14, 2016 No real performance gains by itself. Low water pickup needs to go along with set back and engine height to gain any performance. Bob Makes good products and your lower will come back looking new. One thing to know is if you do touch mud or sand bottom they are much easier to plug up since the pickups are right on the front of the LU under the bullet. Run a water pressure gauge and engine temp gauge. Link to comment Share on other sites More sharing options...
Slo Poke1 Posted August 14, 2016 Author Report Share Posted August 14, 2016 I have their Jackplate, but can't run it on a plane long before getting hot. The shallow water model only has the inlets on the top side of the bullet cone. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.