B2TB Posted October 15, 2016 Report Share Posted October 15, 2016 I have the 18 HPX. The bubbler is mounted in the starboard storage compartment. There is what is I believe is an anti-siphon valve connected to the tubing that then goes into the center livewell. The tubing became disconnected somewhere between the storage compartment and the livewell and I cant figure out how to reconnect it. Anyone have any suggestions or have had a similar problem? Thanks in advance Link to comment Share on other sites More sharing options...
conocean Posted October 19, 2016 Report Share Posted October 19, 2016 I had the same thing happen last year so I ran a new hose from the well to the aerator, with an anti-siphon valve in between. Stick your head in the bilge hatch to see where the old tubing ran; it was quite easy. In my case I found that the valve connector broke off into the tubing which caused the disconnect. Hope this helps! Link to comment Share on other sites More sharing options...
B2TB Posted October 21, 2016 Author Report Share Posted October 21, 2016 Quote Thanks - Found it neatly tied to another hose in the bilge Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.