live to fish Posted December 11, 2016 Report Share Posted December 11, 2016 Ok so I'll see if I can put into words what's going on. I have dual PP set-up, they are about 8 months old. Two days ago my starboard PP quit working altogether and my port PP works intermently. Doesn't matter which remote I use. Checked power to both and they both have power. The port will work normally at times, then go into a funk where as you can hear the motor running, but it's not as strong a sound as when it's working normally. I can play around with the remote and it will finally start working again. The starboard one is a different story. It does not work at all, not even with the controls on top the motor. The little light on top blinks like normal but it doesn't make the chirping or beeping sound like it normally would. Any help would be appreciated. Link to comment Share on other sites More sharing options...
linesider 159 Posted December 11, 2016 Report Share Posted December 11, 2016 Sounds like the cmonster system. Did they have issues simultaneously? Did you actually check the voltage going to them? Link to comment Share on other sites More sharing options...
MPFit Posted December 11, 2016 Report Share Posted December 11, 2016 Yea I'd check voltage into cmonster then after cmonster. Are fuses ok and seated correctly? Link to comment Share on other sites More sharing options...
Lap it Up Posted December 11, 2016 Report Share Posted December 11, 2016 Call PP directly. They have amazing customer service and normally troubleshoot with you over the phone. Link to comment Share on other sites More sharing options...
Miss Jazzy Posted December 12, 2016 Report Share Posted December 12, 2016 ^^ Agree!! Link to comment Share on other sites More sharing options...
live to fish Posted December 12, 2016 Author Report Share Posted December 12, 2016 Yes both have good voltage. I did a visual check and a check on C-monster. I'm baffled on this one. Thanks for the responses. I'll call tech support tomorrow. Link to comment Share on other sites More sharing options...
live to fish Posted December 14, 2016 Author Report Share Posted December 14, 2016 I spoke with PP Tech Support today and determined it's the mother board that is bad. They are shipping me a new one. Link to comment Share on other sites More sharing options...
live to fish Posted December 21, 2016 Author Report Share Posted December 21, 2016 Just an update, it was the mother board that was the culprit. I changed it and now I am back in business. I can't enough good things about JL Marine. They are great!!! Link to comment Share on other sites More sharing options...
HewesYourDaddy Posted December 21, 2016 Report Share Posted December 21, 2016 I had the same thing happen to me. Replaced the board and was back in biz in about 2 days. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.