dcathey Posted January 31, 2017 Report Share Posted January 31, 2017 I have square Yamaha CommandLink guages and I can see them but the fuel economy guage looks rough. Will one of these all in one guages work? If so I could move my good tach guage up into the tower since it has significant sun damage. Thoughts? Are these all in one screens plug and play with what I currently have or is it going to require a huge amount of effort/coin to switch over? Link to comment Share on other sites More sharing options...
redzone1 Posted January 31, 2017 Report Share Posted January 31, 2017 Might need a new wiring harness.... check with Hunter Glenn. Have you tried Flitz on the gauge. It can work wonders Link to comment Share on other sites More sharing options...
FunFlatsFishing Posted January 31, 2017 Report Share Posted January 31, 2017 What engine do you have? If it is 2006 or newer you could always hook it up to your Simrad or Garmin GPS via NMEA 2000 and get lots of that info. Link to comment Share on other sites More sharing options...
dcathey Posted January 31, 2017 Author Report Share Posted January 31, 2017 It's a 2010 but the guage just bothers me. I'm putting a simrad nss9 on there when I get all of my other minor issues resolved Ive got some Flitz, I'll try it when I get it back from service Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.