fishcast Posted February 28, 2017 Report Share Posted February 28, 2017 So I'll officially be getting my first pathfinder boat in a month or so! A used 20 footer with 115 Yamaha. I don't have the boat in my possession yet. I'm curious how hard it is to run wires from the batteries under the deck to the bow for electronics etc? Do they have a tube or something set up to run through etc? Thanks much Link to comment Share on other sites More sharing options...
Tarpon1215 Posted February 28, 2017 Report Share Posted February 28, 2017 There should be a chase running from the left side of the console under the floor to the front. If you're lucky there will be a pull string in that chase. Good luck with the nty boat. Link to comment Share on other sites More sharing options...
FunFlatsFishing Posted February 28, 2017 Report Share Posted February 28, 2017 Should be a chase and pull string. Use dish soap and electrical tape and pull it through. I've run a Lowrance transducer cable with a massive plug on it through. Pulled it out and replaced with a Simrad transducer. Pulled out old PowerPole remote wires and have added NMEA 2000 via it. Pain in the *** but can be done. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.