Mac7 Posted March 13, 2017 Report Share Posted March 13, 2017 What size and what is a good source for the gasket on a 2001? I called Maverick and the guy laughed at me for asking this question because apparently old Maverick owners are not as important as the newer ones. Link to comment Share on other sites More sharing options...
slyshon Posted March 13, 2017 Report Share Posted March 13, 2017 I would hope that not to be accurate but please understand we simply cannot supply parts for boats of that age. I do not recall what we used back in 01 but will look around. Might you have a picture of what is on the boat now? Skip Link to comment Share on other sites More sharing options...
JEM Posted March 13, 2017 Report Share Posted March 13, 2017 That certainly doesn't sound like Ray in parts. I have an 07 Path and he has always gone out of his way to help me figure out what I need. Link to comment Share on other sites More sharing options...
Mac7 Posted March 23, 2017 Author Report Share Posted March 23, 2017 I just needed the size of gasket as far as the bulb and grip but I found some from McMaster Carr that is an exact replacement. 3/4" bulb with 1 15/16" overall height for 1/8" edge grip. It's the same as the gasket my buddy has on his 2013 HPX-T, I just was not sure how to measure it. In reality the bulb is larger than 3/4", I already ordered the wrong stuff once and had to send it back. Thanks guys! Link to comment Share on other sites More sharing options...
Mac7 Posted March 23, 2017 Author Report Share Posted March 23, 2017 On 3/13/2017 at 4:04 PM, JEM said: That certainly doesn't sound like Ray in parts. I have an 07 Path and he has always gone out of his way to help me figure out what I need. Sure was, maybe we were both having one of those days. Link to comment Share on other sites More sharing options...
brett331 Posted December 16, 2017 Report Share Posted December 16, 2017 Mostly a casual obverse here but man I gotta stick up for Ray here. I’ve called him a lot the last 5-6 years & he has always gone above & beyond to help. Link to comment Share on other sites More sharing options...
VS-MasterAngler Posted December 17, 2017 Report Share Posted December 17, 2017 Hey guys I have a 2001 MA 18.5 and the gasket for the rod locker has come off. The gasket it's self is in great condition... Can I just glue it back on, and if so what type of adhesive should I use? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.