Ketchum Posted April 16, 2017 Report Share Posted April 16, 2017 I want to thank Adam at All Aluminum Concepts for doing yet again an amazing job! The main people/companies who made my dream 26 come to life were, Adam Triay At All Aluminum Concepts. 904-731-7377 http://www.allaluminumconcepts.com Robert Salas at Quality Marine Electronics Installation 904-860-7872 Mousa's Auto Interiors and Marine interiors 904-463-1462 https://www.facebook.com/MousasAutoInteriorsAndMore/ The boat has been being worked on in Jacksonville, FL. I wanted the dash to be as little cluttered as we could make it. Therefore the stereo and the autopilot are controlled through the 7616xsv. Also there are electric kite plugs under the gunnel in the corners. I will probably add rod holders as well as mate series rod holders. With the Llebroc seat I am getting a behind the seat rod holder as well as 3 cup holders fabricated powered coated white. I had a clear plexiglass windshield made (I'm not a fan of brown or earth tones or gold). It fits in the small space between the console and the upper stand. I am running a Power Tech OFX 4 17 p ported 3/8. All three companies, All Aluminum Concepts, Robert Salas at Quality Marine Electronics Installation, And Mousa's Interiors were very fairly priced and exceeded my expectations in quality and craftsmanship. I would highly recommend all three! Before: In transit from Connecticut to Florida Let the fun begin: Just a small check list to complete and it's go time! Link to comment Share on other sites More sharing options...
JEM Posted April 16, 2017 Report Share Posted April 16, 2017 Really, really, nice customizations! I love a console as uncluttered as possible. Beautiful upholstery work! . Link to comment Share on other sites More sharing options...
AFE CUMMINS 6.7 Posted April 16, 2017 Report Share Posted April 16, 2017 That's one great looking setup! Congratulations! Link to comment Share on other sites More sharing options...
SCFD rtrd. Posted April 16, 2017 Report Share Posted April 16, 2017 Absolutely beautiful. Link to comment Share on other sites More sharing options...
JEM Posted April 16, 2017 Report Share Posted April 16, 2017 Are you keeping the partial stickers on the console? Just wondering...... Link to comment Share on other sites More sharing options...
Ketchum Posted April 16, 2017 Author Report Share Posted April 16, 2017 Haven't decided about the stickers on the console. But the powdered coated tubes are covering the stickers so probably yes they will be removed. I like the way Barker boats has a unique "B" on the side denoting the brand. I have been trying to come up with something unique like that as the chrome letters on the side for Pathfinder like a unique "PF", if I keep any. I will post the console top and the rocket launcher and cup holder behind the seat when it is completed. On top of the console the compass was moved to the center, 2 cupholders and sea dek was put there. Link to comment Share on other sites More sharing options...
Big Sexy Posted April 17, 2017 Report Share Posted April 17, 2017 Great turn out on your build! Looks wonderful..... i had the opportunity to see the beginning of your build, to say the least i was quite impressed with what Adam was able to do. enjoy your boat Link to comment Share on other sites More sharing options...
fin-addict Posted April 17, 2017 Report Share Posted April 17, 2017 great looking rig, love the upper station, it's huge. thinking of adding seat/backrest to my upper station. nice cover also. best of luck. fin Link to comment Share on other sites More sharing options...
fishmanjj Posted April 17, 2017 Report Share Posted April 17, 2017 very nice rig !! Link to comment Share on other sites More sharing options...
Bruce J Posted April 25, 2017 Report Share Posted April 25, 2017 Beautiful boat, but I have a question about the helm seat. It looks like there are three different versions in the pics. One looks like the factory one with tan panels. Then there's a white one with the diamond quilting. I'm guessing that's the same seat, just reupholstered. Then there's another white one but with a single back piece rather than what looks like two seats. Just wondering what which you ended up with. Link to comment Share on other sites More sharing options...
Ketchum Posted April 25, 2017 Author Report Share Posted April 25, 2017 Llebroc seat with the flip up seat. I wanted more rocket launchers and cup holders behind the helm seat. The Llebroc helm seat provides about 3-4" of space that the factory one did not. Thus allowing me to mount a custom rocket launcher and cup holder. Link to comment Share on other sites More sharing options...
Dawgfan Posted April 27, 2017 Report Share Posted April 27, 2017 Great job! Link to comment Share on other sites More sharing options...
Ketchum Posted April 27, 2017 Author Report Share Posted April 27, 2017 Thanks Dawgfan! I sent Adam a bicycle steering stem that he is modifying that will add support to the trolling motor and a stand to the gunnel. I can't take credit for it because I saw someone post it on The Hull Truth. His was a piece of PVC, mine will be powder coated Aluminum welded to the stem. When it is complete I will post a picture. It is getting powder coated to match so my hope is that it will disappear but add support to the trolling motor head while running. Also I will post a pic of the rocket launcher/ cup holders when it is completed. Link to comment Share on other sites More sharing options...
BradM Posted April 27, 2017 Report Share Posted April 27, 2017 Great looking rig. I've seen a handful of Adam's T-tops now and I've been impressed with all of them, especially considering his price point compared to some of the others here in Jax. I'll have to keep an eye out for your rig, I see you're at Goodby's, right around the corner from me. How long did Mousa have your interior? My stuff has been at his shop for 3-4 weeks now...I took it to him foamed and ready to go, it just needs to be covered. I noticed the JL speakers. Did you go with the 8.8 or 7.7, sub? If you went with the 8.8, how does it sound and are you happy with it? I know we're getting a new boat next year and I'm about to start buying new stereo equipment to now (easier to hide from the wife in small installments). I currently have 4 -7.7's and a 10' sub, that I am very pleased with. Some folks say with 4 -8.8's a sub isn't necessary. Just curious. Enjoy your new ride...maybe you can get it out on some cobia if the wind will just cooperate this weekend. Link to comment Share on other sites More sharing options...
Ketchum Posted April 27, 2017 Author Report Share Posted April 27, 2017 Mousa was very timely with my boat. I would give him a call. No sub, just 8.8s and an amp. If Adam has time, you should have him fire it up. Link to comment Share on other sites More sharing options...
Ketchum Posted May 11, 2017 Author Report Share Posted May 11, 2017 I wanted to add a few pics of what Adam just finished. Also he added the cup holders on top of the helm and the new Gemlux steering wheel. I couldn't be happier with the way it turned out! Link to comment Share on other sites More sharing options...
JEM Posted May 11, 2017 Report Share Posted May 11, 2017 Hey, those upgrades look really nice!!! Just in time for fish slime!!!! Link to comment Share on other sites More sharing options...
Ketchum Posted May 11, 2017 Author Report Share Posted May 11, 2017 Absolutely! Link to comment Share on other sites More sharing options...
JeffD Posted May 11, 2017 Report Share Posted May 11, 2017 Awesome job !!!! Enjoy !!!! Link to comment Share on other sites More sharing options...
Ketchum Posted June 7, 2017 Author Report Share Posted June 7, 2017 A few extras of Adam's handiwork. Clear windshield and support for trolling motor.Heading to Fort Lauderdale to get the engine painted white. Could not be happier with the outcome. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.