BTP21 Posted July 13, 2017 Report Share Posted July 13, 2017 Need a little help/advise please: 05 21'MA. I've got a semi flush mount kingpin(I think thats the name) pedestal base; it has a slotted SS cover.... It is where you could install a seat on the bow of those boats... I'd like to replace it however; I can't get it out:) and 2 I can't find a replacement. Glad I didn't get it out! So any ideas on removal and who sells the part? I'm pretty sure it's 5200'd in place. I'm removing because it's rusted out... Link to comment Share on other sites More sharing options...
whichwaysup Posted July 14, 2017 Report Share Posted July 14, 2017 Are you sure it is only 5200 holding it in there? My 87 MA (18.5) had that on the front deck - it looked to me like it was actually fiberglassed in. Link to comment Share on other sites More sharing options...
SCFD rtrd. Posted July 14, 2017 Report Share Posted July 14, 2017 If you can't get it out, might consider taping off around it, sanding, then Ospho, then paint. Link to comment Share on other sites More sharing options...
BTP21 Posted July 14, 2017 Author Report Share Posted July 14, 2017 Copy: this is a stainless steel part that is about 3" in diameter and sits less than 1/2" of the deck.....trying to replace not remove... It's pretty where it sits just not functional. Link to comment Share on other sites More sharing options...
BTP21 Posted July 15, 2017 Author Report Share Posted July 15, 2017 Yeah, they coulda glassed it too; either way its rusted out and needs replacing. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.