hawg Posted July 27, 2017 Report Share Posted July 27, 2017 Do any of you guys know if the hull color on a 23 DV is in the gel-coat or applied after the hull is out of the mold? I'd like to change the color on my hull and I'd like to know just what I'm dealing with as far as paint adhesion. Thanks. Link to comment Share on other sites More sharing options...
Bamaskeet Posted July 28, 2017 Report Share Posted July 28, 2017 It's gelcoat Link to comment Share on other sites More sharing options...
JEM Posted July 28, 2017 Report Share Posted July 28, 2017 Gel coat is sprayed in the mold before the glass layup is begun. When the hull is popped from the mold.....presto, gel coat is the outer layer on top of the fiberglass! Link to comment Share on other sites More sharing options...
Dawgfan Posted July 29, 2017 Report Share Posted July 29, 2017 Here's a link for Imron Paint. Also, maybe think about getting a wrap instead of painting..... http://www.axaltacs.com/us/en_US/products-services/liquid-coatings/imron.html Link to comment Share on other sites More sharing options...
northernsnooker Posted July 29, 2017 Report Share Posted July 29, 2017 Definitely do a wrap. Cheaper, easier and not permanent. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.