Pf 22 trailer bunk fitting

[Waterman18]

Trying to set my trailer bunks appropriately....should the bunks be directly under the strakes like this

Or sitting to the outside next to strake like this

 

the Ameritrail trailers have 2 sets of rear bunks so it's supported both places I think. This a Real X trailer made in Miami.

[SCFD rtrd.]

You don't want to support your boat by the skin only. The bunks should be lined up with the stringers. That's the strongest part of the hull.

[FROZEN]

 

4 hours ago, SCFD rtrd. said:

You don't want to support your boat by the skin only. The bunks should be lined up with the stringers. That's the strongest part of the hull.

X2.....In setting up my new lift for my PF, I called Ray at MBG. Without knowing the year, he flatly stated to support on stringers, which on their boats, are located directly below the outside edges of the console.

Hope this helps,

[Waterman18]

Could you post a pic of your setup?

 Thanks 

[slyshon]

I believe you are good, hard to tell from the pictures but it looks like your bunks are just outboard of the first set of lifting strakes which is good, directly under the stringers.

Skip