Drummer Posted September 16, 2017 Report Share Posted September 16, 2017 Does anybody know where to acquire new OE gaskets for hatches on Hewes boats? Several of mine have flattened out over the last 17 years. Go figure. Link to comment Share on other sites More sharing options...
JEM Posted September 16, 2017 Report Share Posted September 16, 2017 McMaster - Carr. Link to comment Share on other sites More sharing options...
Bamaskeet Posted September 17, 2017 Report Share Posted September 17, 2017 You can try Flounder Pounders Link to comment Share on other sites More sharing options...
polliwog Posted September 27, 2017 Report Share Posted September 27, 2017 have you tried to go to Maverick and ask the question? They must order from a regular source. Link to comment Share on other sites More sharing options...
Drummer Posted September 29, 2017 Author Report Share Posted September 29, 2017 Called Maverick and got the original equipment supplier name. 100 foot roll with 3M adhesive on the way. I'll report how it works! Link to comment Share on other sites More sharing options...
dropaline Posted September 29, 2017 Report Share Posted September 29, 2017 want to share number Link to comment Share on other sites More sharing options...
Drummer Posted October 2, 2017 Author Report Share Posted October 2, 2017 Sure. It's from Clean Seal, Inc. 800-366-3682. The item I ordered is "105" EPDM, size is .438" tall by .375" wide. I ordered it with 3M sticky back, which is permanent. I have 100 feet on the way, my boat should take just under 50 feet. I'll post on performance after installation. Sure hope it works. Link to comment Share on other sites More sharing options...
Lostsmenfive Posted October 17, 2017 Report Share Posted October 17, 2017 Drummer - I need to replace my seals on a 2003 Master Angler. How did your project go? Thanks Jeff Link to comment Share on other sites More sharing options...
palmetto1 Posted October 22, 2017 Report Share Posted October 22, 2017 Wonder if MA seals different than the Hewes ones Drummer bought? Got a few Id like to replace also. Link to comment Share on other sites More sharing options...
Muddler Posted October 30, 2017 Report Share Posted October 30, 2017 Curious how that works too. I only need a few feet for a MA Link to comment Share on other sites More sharing options...
imsnookyrd Posted October 31, 2017 Report Share Posted October 31, 2017 I looked at the Clean Seal site and it says they have a 100' minimum, I really wanted their seals because of the one piece construction but my boat takes two different styles and I only needed 20' of each. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.