dingoatemebaby Posted February 8, 2018 Report Share Posted February 8, 2018 Hey guys, Bought some LEDs for under my gunnels on my 1999 16' Bayfisher, wondering how everyone is running the wiring, has ever done this, or if anyone has opinions? Looking to drill as few holes as possible, thinking I can run them through the bow compartment back to the console with my trolling motor wiring. It's a longer distance but I can't figure out how to run the wires through the stern side of the cap and keep them out of the bilge with the boats limited bilge access. Thanks and tight lines! Murph Link to comment Share on other sites More sharing options...
mulligan Posted February 9, 2018 Report Share Posted February 9, 2018 I had an 18 Bayfisher and ran them like you described, through the bow and to the console. I just had a small hole high on the bulkhead wall under the gunnels, could not even see them. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.