HarleyG8r Posted February 15, 2018 Report Share Posted February 15, 2018 Accidentally got the ones that screw in, need the ones that push in. Anyone by chance want to trade? Or if you need these, make an offer. Link to comment Share on other sites More sharing options...
dcathey Posted February 15, 2018 Report Share Posted February 15, 2018 Ha, I did the same thing. Got em sitting on my shelf Link to comment Share on other sites More sharing options...
blewbyu Posted February 16, 2018 Report Share Posted February 16, 2018 You can either take a knife and scrape away some of the threads or use a Dremel to sand away part of the threads. Then push it in for a snug fit. Grind a little at a time for the snug fit. Link to comment Share on other sites More sharing options...
HewesYourDaddy Posted February 17, 2018 Report Share Posted February 17, 2018 I did the same thing. It was crunch time leading up to a tournament when I got my new stand pipe. I didn't have time to return for the push-in style so I took a razor blade and some 600 grit paper and cut the treads down to make it fit. Works great. I'm beating my head on the table now that I realized I should've used my rotary tool to grind down the threads. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.