Gbonzo Posted April 3, 2018 Report Share Posted April 3, 2018 Does anyone have any suggestions on how to seal the top of the release well? There is raw glass around the top of the well. Any experience with a remedy would be great. Thanks. Link to comment Share on other sites More sharing options...
cbondy Posted November 14, 2018 Report Share Posted November 14, 2018 Suggest "painting" with gel coat (may require multiple coats) and then 100% silicone sealer to close off the mating surfaces of the well and the liner. Otherwise you get spillage of water into the bilge when the water sloshes around in the well. I'm probably telling you something you have already experienced. I had to seal up all 3 of my wells on my 2013 2400 TRS. Kind of a messy job, but worth it. Not sure why Pathfinder doesn't do this during assembly. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.