flatsfisher772 Posted June 29, 2018 Report Share Posted June 29, 2018 Wanting to add some better seating options after dealing with a back injury. Think of putting a pedestal seat on the bow. Hate the through of cutting holes to mount it but don’t see any other option. Would the section between the two front hatches work? Any suggestions for a clean and easy install would be great! Also any suggestions on the cleanest looking mounting plate. Link to comment Share on other sites More sharing options...
fin-addict Posted June 30, 2018 Report Share Posted June 30, 2018 Bad back also. Base is shower stool, will not rust. Link to comment Share on other sites More sharing options...
HoneyB Posted June 30, 2018 Report Share Posted June 30, 2018 That is High Tech right there !!!!! Link to comment Share on other sites More sharing options...
Tarpon1215 Posted July 1, 2018 Report Share Posted July 1, 2018 I believe that there is a swivleze base that will just fit that cross piece behind the anchor locker. Look on their website. 👍 Link to comment Share on other sites More sharing options...
smilemaker Posted July 2, 2018 Report Share Posted July 2, 2018 If you have a bad back I would go with one of the stool type chairs. The swivel post works ok for the bass fisherman as they are not rocking and rolling. The support and security is no comparison. I have the bass swivel and fishing partner has the stool. Give me the stool anchored by a turnbuckle any day. There are numerous attachments available for a turnbuckle but it will have to mount to the large hatch. It will make the hatch heavier but should work out. Someone on the site must have done it by now. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.