Nolezone Posted August 9, 2018 Report Share Posted August 9, 2018 What’s a good, all around wire gauge to use for trim tabs, bilge pumps, etc? I have lots of corrosion in my bilge wiring and need to slowly start replacing. Thx Link to comment Share on other sites More sharing options...
DonV Posted August 9, 2018 Report Share Posted August 9, 2018 14 ga. Do yourself a favor, buy it in volume. You will always have a need for it. (stay away from WM on wire, too much $$$) http://www.genuinedealz.com/14-awg-gauge-primary-wire-tinned-copper-marine-grade-red Link to comment Share on other sites More sharing options...
Nolezone Posted August 9, 2018 Author Report Share Posted August 9, 2018 3 hours ago, DonV said: 14 ga. Do yourself a favor, buy it in volume. You will always have a need for it. (stay away from WM on wire, too much $$$) http://www.genuinedealz.com/14-awg-gauge-primary-wire-tinned-copper-marine-grade-red Great, thanks. Link to comment Share on other sites More sharing options...
hurricane Posted August 14, 2018 Report Share Posted August 14, 2018 Also another good place for wire. https://www.pacergroup.net/ Link to comment Share on other sites More sharing options...
Capt Dan S Posted September 14, 2018 Report Share Posted September 14, 2018 Make sure get marine grade wire. It is tinned. Very important. https://tinnedmarinewire.com/wire/ Link to comment Share on other sites More sharing options...
imsnookyrd Posted September 14, 2018 Report Share Posted September 14, 2018 Just remember that if in doubt you can always go with larger gauge (lower numerically) but never smaller (higher numerically) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.