THE OUTLAW Posted November 21, 2018 Report Share Posted November 21, 2018 2003 16’ Redfisher 2019 115 SHO Can anyone with this motor please postup the height of that motor , at its maximum tilt , so I will know if it will fit inder my poling platform ? THANKS 🇺🇸☠️ Link to comment Share on other sites More sharing options...
BrownBear Posted November 21, 2018 Report Share Posted November 21, 2018 If you can wait til tomorrow, I plan to finally get around to reconnecting my batteries, (been a busy fall) and I can measure then. I'll also give you platform height. I do know this- With the jackplate all the way up, it's a no-go. Link to comment Share on other sites More sharing options...
THE OUTLAW Posted November 21, 2018 Author Report Share Posted November 21, 2018 Thank you Link to comment Share on other sites More sharing options...
BrownBear Posted November 21, 2018 Report Share Posted November 21, 2018 Hookay.... Hopefully in the following mix of #'s are those most useful too you. From the lip of the mounting ledge on the 115 SHO to the top of the cowling is roughly 27". At max just before full tilt it's approximately 35". Transom to the bottom of the platform in my 2017 RF18 is 41". But the more important measure for me, the jackplate at lowest setting puts the mounting ledge 3" above the transom. With the jackplate all the way down, I've got 3 3/8" clearance between the cowling and the bottom of the platform when tilted. If I tried it with the jackplate all the way up, I'd be buying a new cowling. Link to comment Share on other sites More sharing options...
THE OUTLAW Posted November 21, 2018 Author Report Share Posted November 21, 2018 Thank you 🇺🇸☠️ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.